Product

Steel Mesh

Our steel mesh is made of longitudinal and transverse bars that are carefully and skillfully welded together to make reinforcements of foundations in any construction project.

Our mesh sizes, which refers to the holes that are measured in terms of the distance between the center of distance of line and the cross wires, are mainly in millimeters. We manufacture carbon steel (plain steel), which comes in both woven and welded mesh, which are made of carbon. The choice of carbon steel ensures that we offer you a versatile and diversely used, durable, strong, and magnetic product at relatively low cost. Thus, our steel mesh is suitable in industries and uses such as in window guards, infill panels and grill and radiator lockers among others.

Steel Bar

We supply high quality reinforced steel bars and steel wire to meet the building needs for your construction projects. Our products are all marked and certified to be in compliance with the international steel standard. All our products are certified by the Complied Malaysian & Singapore Standard (suitable for pre- caster for HDB/MRT projects), CIDB certification, SIRIM, and British Standard. The products are available from custom or stock manufacturing.

Physical Properties of Reinforcement Bars

Specifications	Grade	Yield min(N/mm²)	Tensile min(N/mm²)	Ratio(min)	Cal. method	Elong 5D(min %)	Agt(min %)	Bend(size:mm)	Rebend(size:mm)
SS2 Part2:1999	RB500W	500	550	1.05	Norminal	14	2.5	6/8/10:~3D 12:~4D 16&20:5D 25/32/40:~6D (160° to 180°)	6/8/10:~5D 12:~5D 20&25:8D 32/40:~10D (90°-30min-20°)
SS 560:2016	B500B	500-650	Y*1.08	1.08	Norminal		5	≤16mm:3D >16mm:6D	≤16mm:4D >16mm:7D
	B600B	600-780	Y*1.08	1.08	Norminal		5	≤16mm:3D >16mm:6D	≤16mm:4D >16mm:7D
	B500A	500-650		<8mm:1.02 ≥8mm:1.05	Norminal		<8mm:1.0 ≥8mm:2.5	≤16mm:3D >16mm:6D (160°-180°)	≤16mm:4D >16mm:7D (90°-1hr-20°)
AS/NZS 4671:2001	500N	500-650	Y*1.08	1.08	Norminal		5	all sizes:4D (<16 bend 90° >20 bend 180° )	≤16mm:4D >20mm:N.A. (90°-1hr-90°)
	500E	500-600	Y*(1.15-1.40)	1.15-1.40	Norminal		10	same as 500N	same as 500N
	500L	500-750	Y*1.03	1.03	Norminal		1.5	3D	90°-1hr-20°
BS 4449:2005	B500B	500-650	Y*1.08	1.08	Norminal		5		≤16mm:4D >16mm:7D (90°-1hr-20°)

Others

Specifications	Grade	Yield min(N/mm²)	Tensile min(N/mm²)	Ratio(min)	Cal. method	Elong 5D(min %)	Agt(min %)	Bend(size:mm)	Rebend(size:mm)
SIRIM QAS	500A	500-650		<8mm:1.02 ≥8mm:1.05	Norminal		<8mm:1.0 ≥8mm:2.5		≤16mm:4D >16mm:7D (90°-1hr-20°)
MS 146:2014	500B	500-650	Y*1.08	1.08	Norminal		5.0		≤16mm:4D >16mm:7D (90°-1hr-20°)

Standards

Standard	Yield Strength (N/mm²)(MPa)	Weld Shear Load (N)
SS 18:1999 Cold-reduced steel wire for the reinforcement of concrete and the manufacture of welded fabric	500	NA
SS 32:19999 Steel fabric for the reinforcement of concrete	500	250 x area of the larger wire (for plain wires) 150 x area of the larger wire (for ribbed wires)
BS 4482:1985 Cold-reduced steel wire for the reinforcement of concrete	460	NA
BS 4483:1988 Steel fabric for the reinforcement of concrete	460	115 x area of the smaller wires
AS/NZS 4671:2001 Steel reinforcing materials	500	250 x area of the larger wires

Standard Metric Fabric

SS: 32 Or NEF500	BS 4483 Ref. no.	Wire spacing (mm)		Wire diameter (mm)		Cross-sectional area (mm3/m)		Nominal mass
SS: 32 Or NEF500	BS 4483 Ref. no.	Main	Cross	Main	Cross	Main	Cross	(kg/m)²
Square Fabric: A-Series
A13	-	200	200	13	13	664	664	10.42
A12	-	200	200	12	12	566	566	8.88
A11	-	200	200	11	11	475	475	7.46
A10	A 393	200	200	10	10	392	393	6.16
A9	-	200	200	9	9	318	318	4.99
A8	A 252	200	200	8	8	252	252	3.95
A7	A 193	200	200	7	7	193	193	3.02
A6	A 142	200	200	6	6	142	142	2.22
*A5	A 98	200	200	5	5	98	98	1.54
Square Fabric: D-Series
D13	-	100	100	13	13	664	664	20.84
D12	-	100	100	12	12	566	566	17.76
D11	-	100	100	11	11	475	475	14.92
D10	-	100	100	10	10	392	393	12.32
D9	-	100	100	9	9	318	318	9.98
D8	-	100	100	8	8	252	252	7.90
D7	-	100	100	7	7	193	193	6.40
D6	-	100	100	6	6	142	142	4.44
*D5	-	100	100	5	5	98	98	3.08
Square Fabric: B-Series
B13	-	100	200	13	13	664	664	13.50
B12	B 1131	100	200	12	12	566	566	10.90
B11	-	100	200	11	11	475	475	9.43
B10	B 785	100	200	10	10	392	393	8.14
B9	-	100	200	9	9	318	318	6.97
B8A	-	100	200	8	7	335	193	4.14
B8	B 503	100	200	8	8	252	252	5.93
B7	B 385	100	200	7	7	193	193	4.53
B6	B 283	100	200	6	6	142	142	3.73
*B5	B 195	100	200	5	5	98	98	3.05
Square Fabric: E-Series
E13	-	150	150	13	13	664	664	13.89
E12	-	150	150	12	12	566	566	11.84
E11	-	150	150	11	11	475	475	9.95
E10	-	150	150	10	10	392	393	8.23
E9	-	150	150	9	9	318	318	6.67
E8	-	150	150	8	8	252	252	5.27
E7	-	150	150	7	7	193	193	4.03
E6	-	150	150	6	6	142	142	2.96
*Reference No. A5, B5, and D5 are available in Standard Sheet of 6.0m x 2.4m only.

Substitution of Real Steel Fabric for High Tensile Bars

	Bars	Substitution of Real Steel Fabric for High Tensile Bars
Diameter(mm)	Spacing(mm)	Area(mm²/m)	Equivalent Area(mm²/m)	Recommended Real Steel Fabric(mm²/m)
10	75	1047	993	D12 B12 (1131)
	100	786	745	D10 B10 (785)
	125	628	596	D9 B9 (636)
	150	524	497	D8 B8 (503)
	175	449	426	D8 B8 (503)
	200	393	373	D7 B7A B7 (385)	A10 (393)
	250	314	298	A9 (318)	B8A (335)
	300	262	248	A8 (255)	D6 B6 (283)
13	100	1327	1259	D13 B13 (1328)
	125	1062	1007	D12 B11 (1131)
	150	885	839	D11 B11 (950)
	175	759	719	D10 B10 (785)
	200	664	630	D9 B9 (636)
	250	531	504	D8 B8 (503)
	300	442	420	D8 B8 (503)
16	150	1341	1271	D13 B13 (1328)
	175	1149	1090	D12 B12 (1131)
	200	1005	954	D11 B11 (950)
	250	804	763	D10 B10 (785)
	300	670	636	D9 B9 (636)